CHLOR*RID removes chlorides and sulfates from contaminated surfaces in a single dilution with any potable water source. CHLOR*RID is biodegradable, non-flammable and contains no volatile organic compounds. Laboratory and field tests confirm that CHLOR*RID is effective for removing chlorides and sulfates from industrial surfaces.
 

Wasser High-Tech Coatings, Tnemec Company, and Advanced Polymer Sciences, and Plastite have tested CHLOR*RID with their coatings and found that it does not interfere with the adhesion of their coatings. Scanning Electron Microscopy (SEM) inspection by KTA Tator Laboratories established that CHLOR*RID leaves no film or residue after use.

Contamination free results are what truly counts. CHLOR*RID is the easiest and most economical way to remove soluble salt contaminants with any method - high pressure washing, wet abrasive blasting or even hand-cleaning.

(Adobe Acrobat Reader required to view the following files).

KTA Tator Laboratories Letter on the investigation of the effect of CHLOR*RID on removing chloride and sulfate contamination.

MAXIM Letter on the report of water analysis.

Jet Propulsion Laboratory Letter on CHLOR*RID's demonstration.

Chloride Ion Tests with Sea Water Letter

Adding CHLOR*RID to the regular maintenance pressure wash of aircraft will increase the effectiveness of chloride and sulfate removal.

If salts are soluble, why doesn't water remove them?

Because they are electrochemically driven to the substrait and are attached with greater strength than the forces applied to remove them.